Generic PnP monitor is an issue users face after updating to Windows 10. If you also updated Windows 10 recently and facing this problem, then read on to find the best solution to fix it effortlessly.
Are you facing generic PnP monitor problems on your Windows 10 computer? If yes, then do not panic. Through this post, we show you how to fix this issue in the easiest way possible.
But before moving to the solutions, it is first important to know what this problem is and why it exists on your PC. Hence, let’s go a bit deeper into the details of this issue.
What is a Generic PnP Monitor, and what Causes Problems with it
Windows 10’s Device Manager shows your Plug and Play or PnP monitor as a generic PnP monitor if it cannot recognize it. In case Windows fails to recognize the monitor it downloads a generic driver for it. But despite downloading a generic driver, the monitor fails to perform as expected and is displayed with a yellow exclamation mark on the Device Manager. Below are the top reasons for it.
- Outdated display card driver.
- The generic PnP monitor driver needs to be updated.
- Corrupt system files.
- Your Windows version is outdated.
- There are monitor connection issues.
Now, as the causes of the problem are clear, it will be easy for you to fix the generic PnP monitor issues on Windows 10. Let’s begin troubleshooting the problems.
Quick and Easy Solutions for the Generic PnP Monitor Problems on Windows 10
Below are some simple solutions you can use to fix the generic PnP monitor problems on your computer.
Fix 1: Reconnect the PnP Monitor to the PC
The generic PnP monitor problems may appear as the monitor is not properly connected to the computer. Therefore, reconnect it by following the below steps.
Step 1: Turn off both the monitor and computer.
Step 2: Remove the monitor’s power cord and wait for ten minutes.
Step 3: After ten minutes, connect the power cord to the monitor again.
Step 4: Make sure both the CPU and monitor are connected to the power supply.
Step 5: Start the PC again and check whether the generic PnP monitor problems vanish or not.
Fix 2: Remove the Generic PnP Monitor Driver
The generic driver Windows installs for your PnP monitor may be inconsistent with your monitor or OS. Hence, uninstalling it can solve the problems for you. In case you are skeptical about removing the driver, then do not worry. After you uninstall it, Windows takes the monitor as a new device and installs a real-time driver for the PnP monitor. Below is how to uninstall the generic PnP monitor driver.
Step 1: Use the Windows + R shortcut to evoke the Run box.
Step 2: Input devmgmt.msc in the Run box and click on the OK button to activate the Device Manager.
Step 3: After the Device Manager is evoked, click on the Monitors to view the generic PnP monitor.
Step 4: Right-click on the generic PnP monitor and choose the Uninstall device option.
Step 5: Now, make sure the Delete the driver software for this device option is marked and click on OK.
Step 6: After the generic PnP monitor driver is uninstalled, restart the computer to get the non-generic driver installed for your PnP monitor on Windows 10.
Read More: USB PnP Sound Device Drivers Download & Update Windows 10
Fix 3: Check the System Files
As said earlier in this article, corrupt system files are also among the causes behind the generic PnP monitor driver problems on Windows 10. Hence, you need to check the system files by following these steps.
Step 1: In the search box on your computer, type Cmd and right-click the first result.
Image Source: iSunshareStep 2: Choose run as administrator from the right-click menu.
Step 3: After the Command Prompt opens, input sfc/scannow in the command line and press Enter.
Step 4: Wait till the system file checker finds and fixes the corrupt system files.
Step 5: After the process is complete, check whether the generic PnP monitor issues are fixed or persist.
Fix 4: Update the Generic PnP Monitor and Display Card Driver (Recommended)
Outdated PnP monitor or display card driver often results in the problems you are facing. Therefore, you need to update the generic PnP monitor driver on Windows 10 and the display driver to fix the issues. You can either use manual methods like updating the driver with Device Manager or update the drivers automatically. In our humble opinion, the latter is better as using an automatic driver update program makes the task simpler and less time-consuming.
There are plenty of programs you can use to accomplish the task. However, our personal favorite is Bit Driver Updater, as it boasts a one-click button to update drivers and features such as the creation of a system restore point, driver download speed acceleration, etc.
Below is how to use Bit Driver Updater for updating the drivers.
Step 1: Click on the below download button to get the Bit Driver Updater setup.
Step 2: After the setup download completes, click on the downloaded file and go along with the on-screen directions to complete the Bit Driver Updater installation (it only takes a few seconds to get installed).
Step 3: Let the software scan your computer for out-of-date drivers (the scan needs only a couple of seconds to complete).
Step 4: After the scan completes, go to the PnP monitor driver and click on the Update Now button. Similarly, to update the display card driver, click on the Update Now button that is present next to it.
In case you wish to update these and all other outdated drivers with a single click, then choose the Update All option.
Fix 5: Solve Generic PnP Monitor Problems by Updating the OS
If your Windows version is not updated, then you may face the generic PnP monitor driver issues on Windows 10. Therefore, perform an operating system update to make things right. Below is the step-by-step process to do it.
Step 1: Activate the Settings by using the Windows+I keyboard shortcut.
Step 2: Select Update & Security from the Settings menu.
Step 3: Now, pick the Windows Update option from the left side of the Update & Security screen.
Step 4: Click on the option to check for updates.
Step 5: To download and install the available update, click on the Download button.
Step 6: After downloading and installing the update, reboot the PC.
Read More: How To Upgrade Windows 7 To Windows 10 For Free
Fix 6: Perform a Clean Reboot
Sometimes, software conflicts also cause the generic PnP monitor issues on Windows 10. Thus, try performing a clean reboot to fix the problems. You can follow the below steps to do it.
Step 1: Type System Configuration in the search box and select it from the results.
Step 2: Go to the General tab and choose Selective startup.
Step 3: Uncheck the option to Load startup items.
Step 4: Go to the Services tab, check the Hide all Microsoft Services box, and click on the Disable All option.
Step 5: Now, navigate to the Startup tab and click on the option to Open Task Manager.
Step 6: After the Task Manager opens, choose the enabled startup items from the Startup tab and select the option to Disable them.
Step 7: Exit the Task Manager.
Step 8: Click on the OK option in the System Configuration window.
Step 9: Lastly, restart the PC to apply the changes.
Generic PnP Monitor Problems: Solved Successfully
This article guided you through the ways to fix the generic PnP monitor problems on Windows 10. It shared quite a lot of methods to get rid of the issue. However, if you want to try only the best one, then we recommend you perform a driver update with Bit Driver Updater. It fixes this as well as other annoying driver-related problems. And if you think there is a better solution to this problem, then use the comments section to share your knowledge.