If your Logitech Receiver is not recognized or not working, you can read this article to learn the best possible ways to fix it.

Logitech Unifying Receiver makes it possible to connect up to 6 mice and keyboards to your computer. It gives your productivity a boost, as with multiple input devices (Logitech mice and keyboards), you can perform many tasks at the same time. And, it becomes a cause of worry for many users if the Logitech Unifying Receiver is not working.

Are you also worried as your Logitech Unifying Receiver is not detected? If yes, then you are at the perfect place. Through this write-up, we help you fix this issue in the easiest ways and the least amount of time.

Let’s begin fixing the problem without any further delay.

Quick and Easy Fixes for Logitech Unifying Receiver not Working

Here are the quickest and easiest fixes you can use to drive the Logitech Unifying Receiver not working issue away.

Fix 1: Apply basic hacks

Sometimes, you do not need to make any complicated effort to fix issues like Logitech Unifying Receiver not being recognized on Windows. You can solve these problems by implementing a few non-technical solutions. We share them below.

  • Ensure that your Logitech Unifying Receiver is not physically damaged.
  • Make sure that the dongle has no loose connections. To do so, you can follow these steps:
  • Take off the dongle’s cap.
  • Press the points or stick a small piece of paper to bring the contact points a bit closer.

Also Read: How To Download Logitech MX Master Software

Fix 2: Get the Unifying software downloaded and installed

There is special software to ensure proper device syncing and availability of appropriate drivers to prevent the Logitech Unifying Receiver driver error. Therefore, you should download the Logitech software on Windows 10. Below are the instructions to do it.

  • Head to Logitech Unifying software’s official website.
  • Click on Download Now to get the executable file of the software downloaded.logitech unifying receiver software download
  • Click twice on the executable file and follow the instructions to install the software.
  • After installing the software, give your computer a restart.
  • Make a right-click on the Logitech Unifying software and choose the Run as administrator option.
  • Connect your devices and see whether the problem is gone or the Logitech Receiver is not recognized.

Fix 3: Uninstall the conflicting third-party software

Some third-party applications that perform functions like Logitech software are known to cause the Logitech Unifying Receiver not working issue. Hence, you can uninstall these apps (for example, applications like MotioninJoy) to fix the problem. Here are the steps to do it.

  • Use the Windows+R keyboard command to evoke the Run utility.
  • Input appwiz.cpl in the box present on your screen and hit Enter.Type appwiz.cpl and click on OK in the Run Box
  • Right-click on the conflicting software and choose the option to Uninstall it.
  • After completing the application uninstallation, perform a computer restart.
  • Once you have restarted the computer, check whether this solution worked to fix the Logitech Unifying Receiver not detected issue or not.

Fix 4: Perform an update of the mouse and USB driver (Recommended)

Outdated drivers are a big hindrance to the smooth functioning of your computer. They are responsible for almost every problem you encounter, including the Logitech Unifying Receiver not working.

Hence, a driver update can most certainly fix the issue you are experiencing. You can update the drivers in various ways (via Device Manager, manufacturer’s support, or automatic software).

We update drivers automatically using specialized software called Bit Driver Updater. This software needs only a single click to carry out automatic driver updates. Moreover, it also offers useful options like driver backup and restores, speeding up the process of driver download, etc.

You can also try this software by clicking on the below download and installation link.

download now button

After getting the software on your computer, you only need to relax and wait for a few seconds until a list of outdated drivers appears. Once you know which drivers are out-of-date, update them with just a click on the Update All button.Bit driver updater

You can also update the mouse and USB driver singly using the Update Now feature. However, for the top-notch performance of the computer, we prefer updating all the drivers.

Also Read: How To Download, Install & Update Logitech K350 Driver

Fix 5: Hard reset your computer

Hard resets often fix stubborn issues like the Logitech Unifying Receiver not working. Hence, below is how to hard reset your PC.

  • Turn off the computer and remove all the connected devices.
  • Disconnect the PC from a port replicator/docking station.
  • From your computer, remove the AC adapter.
  • In the case of laptops, get the battery out of its compartment.
  • Press the Power button and hold it for 15 seconds to discharge the device completely.
  • Put the battery back in its compartment and replug the AC adapter.
  • Turn on the PC by pressing the Power button.
  • Using the arrow keys, choose Start Windows Normally from the startup menu and hit the Enter key.
  • Reconnect all the peripherals and update all the drivers (you can use Bit Driver Updater to update drivers automatically).
  • Check whether the Logitech Unifying Receiver is working or not.

The problem should be gone by now. If you still have any doubts or confusion, go through the next section of frequently asked questions to clear them.

Frequently asked questions

Here are answers to some repeatedly asked questions about how to fix the Logitech Unifying Receiver not working issue to help you solve it easily.

Q1. How do I reset my Logitech Unifying Receiver?

You can perform the following actions to reset your Logitech Unifying Receiver.

  • Use a well-functioning computer to copy the driver file.
  • Get the mouse and USB drivers updated.
  • Hard reset the computer.

Q2. Why is Logitech Unifying Receiver not working?

Following can be the reasons behind the Logitech Unifying Receiver is not detected, unrecognized, or not working issue.

  • Conflicts with the third-party applications
  • Outdated USB or mouse driver
  • Random bugs
  • Unifying software not present

Q3. How do I get my Logitech Unifying Receiver to work?

You can follow the solutions shared in this article to fix the Logitech Unifying Receiver not working issue. If you don’t wish to try each one of them, you can execute a driver update with Bit Driver Updater to solve the problem in an instant.

Also Read: How To Download Logitech G Pro Wireless Drivers In Windows

Logitech Unifying Receiver not working: Fixed

Through this article, we helped you solve the Logitech Unifying Receiver not working problem. You can use the above-mentioned solutions to get rid of the problem.

If you are short on time, you can update the drivers using Bit Driver Updater to fix the issue instantly.

To know how to fix other tech problems, stay well connected with the Innovana Tech blog.

Leave a Reply

Your email address will not be published. Required fields are marked *